Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Telnet to PIX through VPN

I have a VPN set up between our Netscreen-10 and a PIX firewall. The VPN is working fine (i can see every device on the other side of the pix), however I cannot see the internal interface of the pix. I would like to be able to telnet to and ping the internal address from the other side of the vpn. How can I do this?

3 REPLIES
Silver

Re: Telnet to PIX through VPN

The only way to do this is to telnet to a server or router internally through the VPN and then telnet back to the inside interface of the PIX.

Community Member

Re: Telnet to PIX through VPN

Since most of my firewall installations have involved a switch on the inside, I usually write a script to telnet first to the switch inside the firewall and then back to the firewall.

Community Member

Re: Telnet to PIX through VPN

Another option would be to SSH into the pix from outside of your tunnel.

125
Views
0
Helpful
3
Replies
CreatePlease to create content