cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
246
Views
0
Helpful
1
Replies

TFTP server

molds
Level 1
Level 1

I get a timeout message whenever I attempt to save the pix configuration to a remote tftp server. How is the configuration being saved, via FTP? Do I need to allow the outbound traffic from the inside interface?

1 Reply 1

yusuff
Cisco Employee
Cisco Employee

you need to configure 'tftp-server' command before you 'write net'

eg;

tftp-server outside 10.1.1.1 /

then

pix(config)#write net 10.1.1.1:running.txt

Building configuration...

TFTP write '//running.txt' at 10.1.1.1 on interface 0

[OK]

pix(config)#

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_61/cmd_ref/tz.htm#27128

HTH

R/Yusuf

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: