Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

The Inside server can't connect to outside

Hi All

Anyone can tell what can i do

I had inside server , that's static map global ip on PIX , but the server can't connect to outside and outside host still can't connect the inside server, i am sure the issue not in acl

pixfirewall# sh xlate

Global 100.100.100.100 Local 192.168.1.100

pixfirewall# sh conn

TCP out 66.218.71198:80 in 192.168.1.100:445 idle 0:00:43 Bytes 0 flags SaA

then , i disable floodguard , the host still can't go through PIX outside to internet

Thanks in advance

5 REPLIES
New Member

Re: The Inside server can't connect to outside

Hi,

Did you enter "clear xlate" command after giving the static mapping...

If not enter the command ...

Regards

Kiruba

New Member

Re: The Inside server can't connect to outside

Hi All

Thanks for your response

I had used "clear xlate" command But the inside server still can't connect to outside, anyone can tell me tip to resolve the issue

Thanks in advance

Gold

Re: The Inside server can't connect to outside

Hi Emily -

Have a read of the following document:

http://www.cisco.com/warp/public/707/28.html

..and let us now how you get on.

Hope this helps -

New Member

Re: The Inside server can't connect to outside

HI jmia:

Thanks for your reponse , But i am sure the issue not in acl rule (i don't apply any acl rule on inside)

I suspect that inside server may be had Trojan House or anything else malicious program , anywhere , I don't mind , I just hope the inside server can go through to outside

I hope anyone can help me

Thanks in advance

Gold

Re: The Inside server can't connect to outside

Hi -

Okay, you have no ACL's on the inside - Can you please post your PIX config (excluding ALL real IP's and passwords) and hopefully we can help to sort out your problem.

Thanks -

114
Views
0
Helpful
5
Replies