The Inside server can't connect to outside

[emily]

Hi All

Anyone can tell what can i do

I had inside server , that's static map global ip on PIX , but the server can't connect to outside and outside host still can't connect the inside server, i am sure the issue not in acl

pixfirewall# sh xlate

Global 100.100.100.100 Local 192.168.1.100

pixfirewall# sh conn

TCP out 66.218.71198:80 in 192.168.1.100:445 idle 0:00:43 Bytes 0 flags SaA

then , i disable floodguard , the host still can't go through PIX outside to internet

Thanks in advance

[kthanuva]

Hi,

Did you enter "clear xlate" command after giving the static mapping...

If not enter the command ...

Regards

Kiruba

[emily]

Hi All

Thanks for your response

I had used "clear xlate" command But the inside server still can't connect to outside, anyone can tell me tip to resolve the issue

Thanks in advance

[jmia]

Hi Emily -

Have a read of the following document:

http://www.cisco.com/warp/public/707/28.html

..and let us now how you get on.

Hope this helps -

[emily]

HI jmia:

Thanks for your reponse , But i am sure the issue not in acl rule (i don't apply any acl rule on inside)

I suspect that inside server may be had Trojan House or anything else malicious program , anywhere , I don't mind , I just hope the inside server can go through to outside

I hope anyone can help me

Thanks in advance

[jmia]

Hi -

Okay, you have no ACL's on the inside - Can you please post your PIX config (excluding ALL real IP's and passwords) and hopefully we can help to sort out your problem.

Thanks -