03-29-2006 07:57 AM - edited 02-21-2020 02:20 PM
Hello, my internal clients on my PIX 501 UL couldn't connect to VPN clients. No response when I ping. I tried with Windows XP SP2 Clients and used Cisco Client VPN 4.6
: Saved
:
PIX Version 6.3(5)
interface ethernet0 auto
interface ethernet1 100full
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password *********** encrypted
passwd *********** encrypted
hostname CiscoPIX
domain-name ***********.local
fixup protocol dns maximum-length 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol skinny 2000
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list VPNClients_splitTunnelAcl permit ip any any
access-list inside_outbound_nat0_acl permit ip any 192.168.1.128 255.255.255.192
access-list outside_cryptomap_dyn_20 permit ip any 192.168.1.128 255.255.255.192
access-list inside_access_in permit ip any any
pager lines 24
icmp deny any outside
mtu outside 1500
mtu inside 1500
ip address outside 195.195.195.3 255.255.255.0
ip address inside 192.168.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool VPN 192.168.1.150-192.168.1.169
pdm location 192.168.1.128 255.255.255.255 inside
pdm location 192.168.1.128 255.255.255.192 inside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-group inside_access_in in interface inside
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout sip-disconnect 0:02:00 sip-invite 0:03:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ max-failed-attempts 3
aaa-server TACACS+ deadtime 10
aaa-server RADIUS protocol radius
aaa-server RADIUS max-failed-attempts 3
aaa-server RADIUS deadtime 10
aaa-server LOCAL protocol local
http server enable
http 192.168.1.128 255.255.255.192 outside
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto dynamic-map outside_dyn_map 20 match address outside_cryptomap_dyn_20
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map client authentication LOCAL
crypto map outside_map interface outside
isakmp enable outside
isakmp nat-traversal 20
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption 3des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup VPNClients address-pool VPN
vpngroup VPNClients split-tunnel VPNClients_splitTunnelAcl
vpngroup VPNClients idle-time 1800
vpngroup VPNClients password ********
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.1.15-192.168.1.150 inside
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd domain ***********.local
dhcpd auto_config outside
dhcpd enable inside
username Gilgameshan password *********** encrypted privilege 15
terminal width 80
Cryptochecksum:xxx
: end
04-04-2006 09:02 AM
Check whether VPN clients are able to connect internal clients, If so check for the AAA authentication issue. Also you use sniffer trace.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: