traffic forwarding from pix 802.1Q truncked interface
does anyone know if it is possible to forward traffic from a logical interface on eth1 with security 50 and vlan2 mapping to the outside interface sec0,the eth1 is configured as a physical interface on the native vlan with sec 100.
The problem is that traffic goes from the native vlan to outside but from vlan2 the ping arrives to pix and it is not forwarded outside.
I made the same config as it is inidcated on the pix documentation but need to forward traffic from logical vlans to the internet via outside.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...