Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Trouble shooting Cisco Dialout Utility

Mar 6 05:03:42.040: AAA/AUTHEN (1785767233): status = GETPASS

Mar 6 05:03:42.044: AAA/AUTHEN/CONT (1785767233): Method=LOCAL

Mar 6 05:03:42.044: AAA/AUTHEN (1785767233): status = PASS

Mar 6 05:03:42.284: TAC+: (132576441): received author response status = ERROR

Mar 6 05:03:43.580: tcp21: conn not alive

Mar 6 05:03:43.584: TTY21: destroy timer type 2

Mar 6 05:03:43.584: TTY21: Line reset by "TTY Daemon"

Mar 6 05:03:43.588: TTY21: Modem: (unknown)->HANGUP

Mar 6 05:03:43.864: AAA/MEMORY: free_user (0x508FBC) user='dialout' ruser=' po

rt='tty21' rem_addr='172.22.22.62' authen_type=ASCII service=LOGIN priv=1

Mar 6 05:03:43.868: TTY21: destroy timer type 0

Mar 6 05:03:43.868: TTY21: destroy timer type 1

Mar 6 05:03:43.872: TTY21: destroy timer type 3

Mar 6 05:03:43.872: TTY21: destroy timer type 4

Mar 6 05:03:43.876: TTY21: destroy timer type 2

Mar 6 05:03:44.176: TTY21: dropping DTR, hanging up

Mar 6 05:03:44.180: tty21: Modem: HANGUP->IDLE

As can be seen by the above logs we have success in the AAA authentication but cannot attach to a modem.

  • Other Security Subjects
1 REPLY
Anonymous
N/A

Re: Trouble shooting Cisco Dialout Utility

Need to understand what happens between

authentication at 05:03:42.044 and

the disconnect at 05:03:43.580. I

would suggest you enable "debug modem",

"debug telnet", and "debug ip tcp trans"

to see if that sheds any light.

84
Views
0
Helpful
1
Replies
This widget could not be displayed.