cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
234
Views
0
Helpful
1
Replies

Trouble shooting Cisco Dialout Utility

admin_2
Level 3
Level 3

Mar 6 05:03:42.040: AAA/AUTHEN (1785767233): status = GETPASS

Mar 6 05:03:42.044: AAA/AUTHEN/CONT (1785767233): Method=LOCAL

Mar 6 05:03:42.044: AAA/AUTHEN (1785767233): status = PASS

Mar 6 05:03:42.284: TAC+: (132576441): received author response status = ERROR

Mar 6 05:03:43.580: tcp21: conn not alive

Mar 6 05:03:43.584: TTY21: destroy timer type 2

Mar 6 05:03:43.584: TTY21: Line reset by "TTY Daemon"

Mar 6 05:03:43.588: TTY21: Modem: (unknown)->HANGUP

Mar 6 05:03:43.864: AAA/MEMORY: free_user (0x508FBC) user='dialout' ruser=' po

rt='tty21' rem_addr='172.22.22.62' authen_type=ASCII service=LOGIN priv=1

Mar 6 05:03:43.868: TTY21: destroy timer type 0

Mar 6 05:03:43.868: TTY21: destroy timer type 1

Mar 6 05:03:43.872: TTY21: destroy timer type 3

Mar 6 05:03:43.872: TTY21: destroy timer type 4

Mar 6 05:03:43.876: TTY21: destroy timer type 2

Mar 6 05:03:44.176: TTY21: dropping DTR, hanging up

Mar 6 05:03:44.180: tty21: Modem: HANGUP->IDLE

As can be seen by the above logs we have success in the AAA authentication but cannot attach to a modem.

1 Reply 1

Not applicable

Need to understand what happens between

authentication at 05:03:42.044 and

the disconnect at 05:03:43.580. I

would suggest you enable "debug modem",

"debug telnet", and "debug ip tcp trans"

to see if that sheds any light.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: