Trying to acheive redundancy for VPN tunnel terminating on 2811
We have a 2811 terminating the T1 at our remote office. The 2811 also terminates the VPN tunnel between the remote office and the main office. To provide redundancy for the Internet connection DSL was terminated on the 2811. I configured new crypto map with the exact same settings as the crypto map for the T1 and added a NAT statement for the inside interface to use the DSL interface. When I shut down the T1 interface, the tunnel becomes active on the DSL interface and I can see the status when I do sh crypto isa sa but no traffic is being sent thru the new tunnel. Pings to the internal network at the main office fail.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...