02-01-2006 06:53 AM - edited 03-09-2019 01:48 PM
I'm deploying two apps that need to monitor and connect to the firewall via telnet/ssh. What I want to acheive is only allow access from two servers from inside interface. When I specify the IP address,.
FWSM#(config)telnet 147.11.2.3 255.255.0.0 inside
the entry in the config is
telnet 147.11.0.0 255.255.0.0
which is allowing any machine or account on the inside interface tyo connect to the firewall. How do I tie this down?
Solved! Go to Solution.
02-01-2006 03:32 PM
not sure if i understand the issue correctly.
to allow only two servers to telnet to the firewall,
telnet 147.11.2.3 255.255.255.255 inside
telnet 147.11.2.4 255.255.255.255 inside
02-01-2006 03:32 PM
not sure if i understand the issue correctly.
to allow only two servers to telnet to the firewall,
telnet 147.11.2.3 255.255.255.255 inside
telnet 147.11.2.4 255.255.255.255 inside
02-03-2006 06:52 AM
Jackko,
That got it working...
couldn't see the simple solution for looking for the hard way...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide