Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Unable to access ACS 4.1 WEB ADMIN

Hi,

We have 1 ACS Appliance 4.1

It is being used 4 MAC authentication 4 AP. MAC addresse sare being configured in ACS & users are being authenticated properly. But i am unbale to access the web admin of ACS.

I can access it via console port only.

Is there any specific setting to be done 4 accessing the web interface?

2 REPLIES
Bronze

Re: Unable to access ACS 4.1 WEB ADMIN

Enables ACS to use the secure socket layer (SSL) protocol to encrypt HTTP traffic between the CSAdmin service and the web browser that accesses the web interface. This option enables encryption of all HTTP traffic between the browser and ACS, as reflected by the URLs, that begin with HTTPS. Most browsers include an indicator for SSL-encrypted connections.

To enable SSL, first install an a server certificate and a certification authority certificate. Choose System Configuration > ACS Certificate Setup to access the installation process. With SSL enabled, ACS begins using HTTPS at the next administrator login. Current administrator sessions are unaffected. In the absence of a certificate, ACS displays an error.

New Member

Re: Unable to access ACS 4.1 WEB ADMIN

Hi person,

Commonly the Cisco ACS is dont run over the default port for HTTPS (443). In this case, you must use the following URL to access remotely (Web Admin) your Cisco ACS:

https://address_of_the_ACS:2002

Try this!

Regards,

BHS

488
Views
0
Helpful
2
Replies
CreatePlease login to create content