Update pix535 problem!!!!!

[lprong]

I update a pix535 from 6.0 to 6.1,after i finish the update os then reboot pix ,

but it cann't load new os £¬why ?

the message list below:

Not enough supported network interface cards installed.

PIX requires at least 2 supported interface cards,

but only 0 supported int

why ?

[sghosh]

Hi,

Please see the field notice below:

http://www.cisco.com/warp/public/770/fn15028.shtml

The FE Cards will need to be RMAed.

Please open a case with the TAC.

Thanks

Sujit

[lprong]

Hi,thanks for your reply,i would open a case with this .

thanks