Hi,
Below is a sh ver of the PIX 506. Is there anything we should be aware of (ie. activation key... etc) with the upgrade?
TIA.
PF
sh ver
Cisco PIX Firewall Version 6.1(2)
Cisco PIX Device Manager Version 1.1(2)
Compiled on Mon 31-Dec-01 08:44 by morlee
Pix up 80 days 22 hours
Hardware: PIX-506E, 32 MB RAM, CPU Pentium II 299 MHz
Flash E28F640J3 @ 0x300, 8MB
BIOS Flash AM29F400B @ 0xfffd8000, 32KB
0: ethernet0: address is 0009.7cb4.06c0, irq 10
1: ethernet1: address is 0009.7cb4.06c1, irq 11
Licensed Features:
Failover: Disabled
VPN-DES: Enabled
VPN-3DES: Enabled
Maximum Interfaces: 2
Cut-through Proxy: Enabled
Guards: Enabled
Websense: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
ISAKMP peers: Unlimited
Serial Number: 406170618 (0x1835abfa)
Activation Key: 0x65c52c45 0x4a466da7 0xd38f5a70 0x1747d554
