Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Upgrading from ASA 7.2 -> 8.0. L2L IPSEC Issues...

Hi All,

We just recently upgrading one ASA firewall to version 8, for evaluation purposes. Upgrade was straight forward with no errors. Most of the existing rules are working fine. We do noticed a problem with most of our L2L IPsecs. We cannot get them working, configuration is there and migrated OK. they are kept stack in MM_WAIT_DELETE and log shows....

%ASA-3-713902: Group = 10.50.133.175, IP = 10.50.133.175, QM FSM error (P2 struct &0xc9080ba0, mess id 0x513c9acd)!

%ASA-3-713902: Group = 10.50.133.175, IP = 10.50.133.175, Removing peer from correlator table failed, no match!

We did try to delete a few and recreate them, but no luck....

Any ideas????

2 REPLIES
New Member

Re: Upgrading from ASA 7.2 -> 8.0. L2L IPSEC Issues...

Hi All,

Just to let you know that, we managed to solve our problem by upgrading to interim release 8.0(3)-6.

Regards.

New Member

Re: Upgrading from ASA 7.2 -> 8.0. L2L IPSEC Issues...

As an FYI, we had a similar issue yesterday after going to 7.2(2). There are previous posts that mention this, but the solution for us was here:

http://www.cisco.com/en/US/products/ps6120/products_tech_note09186a00807e0aca.shtml#Solution8

135
Views
5
Helpful
2
Replies