09-02-2003 07:36 AM - edited 02-20-2020 10:57 PM
I have the .bin file for 6.3(2) on my tftp server. I need instructions to upgrade my pix from 6.2(2) to 6.3. Please let me know the commands to back up my existing configuration and upgrade to newer version.
09-02-2003 07:54 AM
backup your old version first with :
write net [
Pull the new one in with :
copy tftp[:[[//location][/pathname]]] flash[:[image | pdm]]
09-02-2003 08:36 AM
I am getting the following error message.
Pix-Admin1(config)# write net 204.142.253.86:622
Building configuration...
TFTP write '622' at 204.142.253.86 on interface 1
Timed out attempting to connect
[FAILED]
What do you think is wrong? I am using solarwind tftp server.
09-02-2003 08:54 AM
When that has happened to me the tftp server wasn't running or I lacked port connectivity to the tftp server. I did see it have a problem with the file name once as well.
I got around it by specifying a tftp server and path in the pix config.
If you are in Windows, try restarting your tftp server.
09-02-2003 08:40 AM
I am getting the following error message.
Pix-Admin1(config)# write net 204.142.253.86:622
Building configuration...
TFTP write '622' at 204.142.253.86 on interface 1
Timed out attempting to connect
[FAILED]
What do you think is wrong? I am using solarwind tftp server.
09-02-2003 08:51 AM
Try creating a file in the TFTP root directory called '622'. Some TFTP servers require that a 0 byte file exist before writing to it. Hope this helps.
Scott
09-02-2003 11:02 AM
Is your tftp server on the inside or outside interface? If it's on the outside, you will have to specify it using the 'tftp-server' command, eg:
tftp-server outside 204.142.253.86 /
Hope that helps...
09-02-2003 09:47 AM
Hi...
Perhaps to save you a second upgrade, I believe 6.3(2) has been deffered with 6.3(3) the preferred image.
Later...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide