I am upgrading my failover pixs by the instruction in the above link. The primary pix is connected only to my laptop which running a tftp server. Using the copy tftp flash I get a connection timed out error.
The Laptop is connected to the pix via ethernet to internal E1. I can telnet and ping the pix. but I cannot ping the notebook from the pix.
do you have a link light on both interfaces? is your laptop ip addressed in the same subnet as the interface it is connected to? have you tested the laptop's tftp server - win2k has a command line tftp client you could use
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...