06-20-2006 10:39 PM - edited 02-21-2020 12:59 AM
When i do a "show logging" command in my Cisco Pix Firewall(6.3), I am able to see the below message,
605005: Login permitted from x.x.x.x/33652 to eth1:y.y.y.y/telnet for user ""
In the above message why the username is not been printed ?
Solved! Go to Solution.
06-21-2006 07:23 AM
does your config have "
aaa authentication telnet console TACACS+|RADIUS|LOCAL "?
06-21-2006 03:53 AM
do you have AAA enabled for telnet access?
aaa authentication telnet console TACACS+|RADIUS|LOCAL
06-21-2006 04:10 AM
Is there is TACAS/AAA authentaication configured ?
06-21-2006 06:44 AM
I don't use a Radius Server. Let me know the steps to find out what type of authentication is configured ?
06-21-2006 07:23 AM
does your config have "
aaa authentication telnet console TACACS+|RADIUS|LOCAL "?
06-21-2006 08:42 AM
No. I have "aaa authentication ssh console LOCAL" Seems its enabled for "ssh". Tried logging with ssh and the username is printed. Need to enable for telnet too.
Thanks for the help extended.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide