Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Using BGP over DMVPN

Anyone have config examples for configuring BGP over a DMVPN network, if it's even possible?

6 REPLIES

Re: Using BGP over DMVPN

if u use IBGP it will work but EBGP dosnt unless u advetise all the tuneel links, because with DMVPN u need to advertise the tunnel interface so when the spokes rigister with hub the hub will be able to point the first packet coming from newly rigistered spoke to other spoke then subsequent packet will be direct spoke to spoke

good luck

if helpful Rate

Re: Using BGP over DMVPN

if u use IBGP it will work but EBGP dosnt unless u advetise all the tuneel links, because with DMVPN u need to advertise the tunnel interface so when the spokes rigister with hub the hub will be able to point the first packet coming from newly rigistered spoke to other spoke then subsequent packet will be direct spoke to spoke

good luck

if helpful Rate

Re: Using BGP over DMVPN

if u use IBGP it will work but EBGP dosnt unless u advetise all the tuneel links, because with DMVPN u need to advertise the tunnel interface so when the spokes rigister with hub the hub will be able to point the first packet coming from newly rigistered spoke to other spoke then subsequent packet will be direct spoke to spoke

good luck

if helpful Rate

New Member

Re: Using BGP over DMVPN

Nice, but configs would be helpful

Re: Using BGP over DMVPN

what topology u look for

let me know how and which IGP and so on to let me know the required config

Re: Using BGP over DMVPN

if u use IBGP it will work but EBGP dosnt unless u advetise all the tuneel links, because with DMVPN u need to advertise the tunnel interface so when the spokes rigister with hub the hub will be able to point the first packet coming from newly rigistered spoke to other spoke then subsequent packet will be direct spoke to spoke

good luck

if helpful Rate

1192
Views
0
Helpful
6
Replies
CreatePlease to create content