Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Using Cisco Client behind a Sonicwall firewall

I am wanting to use my cisco client 3.5 to access an authentication server on our customers network for administration duties.

I am using client 3.5 going through a Sonicwall Pro 300 firewall set for NAT and connecting to a 3005 concentrator which then authenticates the user via a a Radius Server.

I am able to authenticate from the client but am unable to use terminal services,vnc,telnet or even ping the destination server.

Where as when I use a dial-up connection via 3rd Party ISP I can authenticate and access the Radius server via terminal services etc etc.

I looked at the Sonicwall firewall to see if ipsec passthrough was available but unable to find it.

I find it strange that I can authenticate (establishing the tunnel) on my internal lan, but no do anything else.

I am assuming it has something to do with the sonicwall.

here is the path i am trying to achieve.

Cisco client-sonicwall-3005 concentrator-cygberguard firewall-authentication server.

Thanks in advance

Andy

2 REPLIES
Silver

Re: Using Cisco Client behind a Sonicwall firewall

Is the nat traversal feature enabled on the 3005? That will wrap the ipsec packets in udp to work behind NAT.

New Member

Re: Using Cisco Client behind a Sonicwall firewall

Thanks for the response.

So I am assuming that Nat traversal does not need to be enabled for the authentication phase as I am able to do this.

114
Views
0
Helpful
2
Replies
CreatePlease to create content