Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Using IE through a VPN

I have a remote user who connects to our network through a cable broadband connection (Roadrunner) to our PIX 506e Firewall/VPN box. She is running Win98 and IE 6 sp1. When connected to our network through the VPN, she cannot use her web browser to surf the Internet. Is there a way of having this happen either through her own ISP or through our network?

1 REPLY
New Member

Re: Using IE through a VPN

Hi

At a guess you haven't got split tunneling enabled - which means that at the moment all traffic will be routed across the VPN tunnel.

To define split tunneling, you need to do something along the lines of the following:

vpngroup vpnclient address-pool vpnpool

vpngroup vpnclient split-tunnel 101

vpngroup vpnclient idle-time 1800

vpngroup vpnclient password ********

access-list 101 permit ip any

where and identify the network that you want traffic to be tunnelled. You can specify multiple networks if required.

Hope this helps. Regards, Barry

185
Views
0
Helpful
1
Replies