Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Using PDM with established

I have a command in the PIX

established tcp 135 0 permitto tcp 1024-65535 permitfrom tcp 0

Cisco PIX Firewall Version 6.2(1)

Cisco PIX Device Manager Version 2.0(2)

When i start the PDM i got the message that the command is not supported, and i must remove this before PDM works correctly???

Is there comming an upgrade of PDM, or should i not use this command, which is for making a RPC connection from the client to a exchange server.

1 REPLY
Cisco Employee

Re: Using PDM with established

PDM does not support 'established' command and erstricts you to Monitoring tab only.

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/relnotes/pdmrn202.htm#xtocid36

If any of the commands listed in above URL are present in your configuration, you can only use the Monitoring tab. So, if you wish to continue using PDM, you have to remove the above command.

HTH

R/Yusuf

89
Views
0
Helpful
1
Replies
CreatePlease login to create content