10-11-2001 11:30 AM - edited 02-21-2020 11:26 AM
I have notice that for windows 2000 the vpn client won't be out until next year. So the new plan is to get the pptp up and running but i need help in this field. Does Microsoft have a download on the site for vpn or we just use the dialup network. Do we have to point the server to the router for key exchange. Do i have to load anything on the server.
Please help me on this.
10-16-2001 12:41 PM
Are you terminating PPTP at the router or using an MS RAS server? Heres some info I found http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Internetworking:PPTP
01-11-2002 02:15 PM
going to us MS RAS do you know what port i have to open on the router to allow pptp to the vpn server.
01-15-2002 05:14 AM
You will have to allow protocol gre(47) and tcp 1723 through the router for pptp traffic.
01-24-2002 07:56 AM
I have been racking my brain trying to figure something out; maybe you could help.
I don't have any experience with routers, but I have been going all over setting up PCs to connect to our VPN server by ways of the Microsoft VPN adapter. I know that port 1723 needs to be opened for the VPN, I know that port 1433 needs to be opened so they can connect to our SQL server, and I know that protocol 47 (GRE) needs to be enabled.
But I have no idea how to configure the router. I have been trying to find the commands, but no luck. We tried permiting the IP address and ports and the GRE, but still unable to connect.
Could you please help me, or point me in the right direction.
Joe
01-15-2002 08:32 AM
What VPN client won't be out til next year? The cvpn IPsec client's been out for some time.
01-15-2002 09:26 AM
Hello !
We are having the same problem to create a VPN with remote users using a 1751 with IOS. Can't we use the IOS to create an ipsec tunnel to the clients and assign them an internal IP?
Thanks
Alex
01-15-2002 09:35 AM
I am using the 3.5 client and it runs fine on 95, 98, NT, 2000, and XP. I have 2000 at home and have been running it for 2 months now.
Scott
05-09-2002 06:02 AM
How did you configure the W2K Pro at home with the 3.5 VPN client? I'm setting one up with pre-shared key and having difficulty connecting. Can you send me the W2K settings or a document that helped you config it? Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide