08-02-2007 08:41 AM - edited 02-21-2020 01:37 AM
I would like to know where I would assign the Radius with Expiry on an ASA for a VPN group? Can this be done on ADSM as well?
Thanks
Dwane
Solved! Go to Solution.
08-02-2007 09:17 AM
I believe it is now called "password-management".
Yes, it can be done in the ASDM.
Config -> VPN -> edit tunnel group -> General/Basic Tab
check "enable notification upon password expiration to allow user to change password"
Please rate helpful posts.
08-02-2007 09:17 AM
I believe it is now called "password-management".
Yes, it can be done in the ASDM.
Config -> VPN -> edit tunnel group -> General/Basic Tab
check "enable notification upon password expiration to allow user to change password"
Please rate helpful posts.
08-02-2007 10:29 AM
I am looking at this ADSM and I am using 6.0 with 8.02 IOS on the ASA 5520. I do not even see a tunnel-group on the Remote VPN tab.
I will continue looking. I would even be happy with the CLI command.
Thanks
Dwane
08-02-2007 10:33 AM
I did find it on ADSM 6.0. Here is the section.
It is Remote Access VPN-> IPSec Connection Profiles->Advanced->General.
And it is Password management now.
Thanks again for your help.
Dwane
08-02-2007 10:45 AM
The cli command is "password-management".
Glad it helped. I've never been able to get the part to work where it notifies you your password will expires in x days. But I have been able to change my password once it expired.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: