Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Using Radius with Expiry on an ASA 5520

I would like to know where I would assign the Radius with Expiry on an ASA for a VPN group? Can this be done on ADSM as well?

Thanks

Dwane

1 ACCEPTED SOLUTION

Accepted Solutions
Green

Re: Using Radius with Expiry on an ASA 5520

I believe it is now called "password-management".

Yes, it can be done in the ASDM.

Config -> VPN -> edit tunnel group -> General/Basic Tab

check "enable notification upon password expiration to allow user to change password"

Please rate helpful posts.

4 REPLIES
Green

Re: Using Radius with Expiry on an ASA 5520

I believe it is now called "password-management".

Yes, it can be done in the ASDM.

Config -> VPN -> edit tunnel group -> General/Basic Tab

check "enable notification upon password expiration to allow user to change password"

Please rate helpful posts.

Community Member

Re: Using Radius with Expiry on an ASA 5520

I am looking at this ADSM and I am using 6.0 with 8.02 IOS on the ASA 5520. I do not even see a tunnel-group on the Remote VPN tab.

I will continue looking. I would even be happy with the CLI command.

Thanks

Dwane

Community Member

Re: Using Radius with Expiry on an ASA 5520

I did find it on ADSM 6.0. Here is the section.

It is Remote Access VPN-> IPSec Connection Profiles->Advanced->General.

And it is Password management now.

Thanks again for your help.

Dwane

Green

Re: Using Radius with Expiry on an ASA 5520

The cli command is "password-management".

Glad it helped. I've never been able to get the part to work where it notifies you your password will expires in x days. But I have been able to change my password once it expired.

190
Views
0
Helpful
4
Replies
CreatePlease to create content