Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Users might experience few discrepancies in Search results. We are working on this on our side. We apologize for the inconvenience it may have caused.
New Member

video conferencing and pix firewall

Dear All ,

We are setting up video conferences in our branch offices.. each office having pix 535 firewalls.

wht ports need to be opened on Firewalls , i read some doucments.. but every where its bit different about ..wht ports need to be opened..

can any body implemented the same.. through pix firewalls..

thanks in advance

Regards

nataraj

2 REPLIES

Re: video conferencing and pix firewall

Hi

if ur using netmeeting then u shuld open TCP connections on port 389,533,1503,1720 and 1731

Also u need to allow on the TCP/UDP on dynamically assigned ports 1024-65535.

For more info u can check out the firewall config for netmeeting in micrsofot website.

If its some other product being used for vdoconf then i would suggest to check up with

the product site and check out for the ports required to be open in the F/W.

regds

New Member

Re: video conferencing and pix firewall

We are running a Tandberg setup and we frequently connect to Polycom systems. So I had to open ports for both systems depending on who negotiates the handshake. Here is what I opened on our 535

object-group service Tandberg_tcp tcp

description Video Conferencing tcp Ports

port-object eq h323

port-object range 5555 5580

port-object range 3230 3238

port-object eq 1719

object-group service Tandberg_udp udp

description Video Conferencing udp Ports

port-object range 2326 2573

port-object range 3230 3258

port-object eq 1719

Each Codec also has a static IP translation through the firewall

128
Views
3
Helpful
2
Replies
CreatePlease to create content