Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Viewing IDS system parameters

I'm connected to the IDS sensor via serial cable. What commands do i use to display the serial number of the IDS box.

Thanks for your help!

4 REPLIES
Cisco Employee

Re: Viewing IDS system parameters

There is not currently a CLI command for viewing the serial number.

New Member

Re: Viewing IDS system parameters

Ok...

Then what is the serial number for the IDS devices? Is it the Service Tag # or the Express Service Code from the sticker on the top of the server?

Cisco Employee

Re: Viewing IDS system parameters

The Service Tag.

The Service Tag and the Serial Number are generally the same.

(Most sensors will have a smaller sticker somewhere else on the sensor with the serial number and you will see it matches the number in the service tag.)

New Member

Re: Viewing IDS system parameters

The Service Tag is used for the Serial Number on IDS-4210, -4235, and -4250 appliances. All other Cisco IDS appliances should have a standard Serial Number label on the chassis.

118
Views
0
Helpful
4
Replies
CreatePlease to create content