Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

virtual http from outside to inside not working. urgent help required pls

hi all can someone pls help me. i am able to authenticate rdp and all other kinds of trafic with the help of virtual http and virtual telnet from inside to outside. but i am unable to achieve the same from outside to inside.

int e0

no sh

nameif outside

ip add 1.1.1.1/24

int e1

no sh

nameif inside

ip add 10.1.1.1/24

acs server is on 10.1.1.3 and rdp server is on 10.1.1.2

host is connected on the outside with 1.1.1.2

aaa-server cisco protocol tacacs+

aaa-server cisco (inside) host 10.1.1.3

key cisco

static(inside,outside) 1.1.1.3 10.1.1.2 netmask 255.255.255.255

access-list 101 per tcp any host 1.1.1.3 eq 3389

access-list 101 per tcp any host 1.1.1.4 eq 80

access-list 101 per tcp any host 1.1.1.5 eq 23

access-group 101 in interface outside

virtual-telnet 1.1.1.5

virtual-http 1.1.1.4

when i am trying to telnet or do http to this virtual ip;s i am not getting triggered for authentication. what could be the problem. so i have to do a static nat for virtual http and virtual telnet servers.

what am i missing. can someone pls help me.

on the acs server also i have permitted http 1.1.1.4 and telnet to 1.1.1.5.

pls urgent help required.

regards

sebastan

1 REPLY
Bronze

Re: virtual http from outside to inside not working. urgent help

88
Views
0
Helpful
1
Replies
CreatePlease to create content