I am having the exact same problem. Vista RTM, client 4.8.01.0590. I was able to connect on first boot, but not on subsequent boots. I have tried restarting Both Cisco and IKE services with no success. I get "Reason 442: Failed to enable Virtual Adapter". The "Diagnose" function on the Cisco VPN adapter shows all is in order. Any suggestions? Thanks!
A temporary solution... I have found that a "Repair" install (right click on .MSI, repair) allows me to connect with out uninstall > reboot. Not much of a permanent solution, but it works for now. I have a feeling we are going to have to wait for the next revision for a stable client.
I have the same problem. I would love to know how Cisco can fail to have a working version of their VPN Client for an OS that has been in developement for 5 years and is now on release to business users (which is why we are using it (i.e. its not the RTM version but the release version for enterprise customers) Give that Cisco write the IP stack for Microsoft, what is the delay in a working version.... A very discruntled IT Manager.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...