I have implemented Private Addressing scheme at the branch offices of my organisation. Now I need to be able to connect to each node in the branch offices through the internet using VPN. My idea is to configure each office as a seperate VLAN under the current Private Addressing and be able to access each node directly from my office in the HQ over the internet.
Can someone shed some light on how I can accmplish this?
suppose you are having 3 Branch offices & one Head office then staticly assign four private vlans thru routers per branch office and four internet backbone IP address to route using which protocol the internet uses and privately assign rip or eigrp in all routers then assign the ip address for internet backbone
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...