Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN 1841:Unable to access network resources.Please advise

Hi,

I'm Unable to access vpn resources once i vpn successfully i can't ping the servers.I have attached my config for review.I need bit of assistance please.

1 REPLY
Cisco Employee

Re: VPN 1841:Unable to access network resources.Please advise

Hi,

You need to by pass NAT for the traffic from the LAN to the VPN Client Pool.

access-list 150 deny ip 192.168.168.0 0.0.0.255 172.30.50.0 0.0.0.255

access-list 150 permit ip 192.168.168.0 0.0.0.255 any

ip nat inside source list 100 interface dialer0 overload

So, in the above example, any traffic sources from 192.168.168.0/24 destined to 172.30.50.0/24 is not NATted.

Please refer the below URL for details.

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a008009475c.shtml

I hope it helps.

Regards,

Arul

95
Views
5
Helpful
1
Replies