VPN 3000 : lan to lan (to dynamic IP address)

[akirkby]

Hi,

We are trying to configure a LAN-LAN VPN between a VPN3000 and a 3G (Sarian) router. The 3G router receives a dynamic IP address but the VPN3000 requires a Peer address when configuring a LAN-LAN connection.

How can I configure this sort of connection when the remote client has a dynamic address - the VPN3000 will not accept the config without a peer address.

many thanks,

Andy.

[Kamal Malhotra]

Hi Andy,

You can configure the concentrator to accept L2L connection from a dynamic peer. Following is the config example :

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00801dd672.shtml

HTH,

Please rate if it helps,

Regards,

Kamal