Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VPN 3000 v 4.7 - Tunnel statistics

Hi Guys

We are running a VPN 3020 box with sofware 4.7.

We would like to monitor the load on the various LAN - to - LAN tunnels with MRTG / Cacti.

However, if we connect through SNMP (which works fine) we only see the physical interfaces but no logical tunnel interfaces.

I have searched the configuration and the manuals for this. I found it only mentioded once that I should be able to see tunnels as interfaces under the "statistics" tab (in the web: Monitoring -> Statistics -> MIBII-Stats -> Interfaces). But there I see only the physical interfaces too.

Have you ever achieved to monitor (with traffic graphs) the tunnels of a VPN 3000? Am I probably missing something there?

Greetings

Stephan

1 REPLY
Silver

Re: VPN 3000 v 4.7 - Tunnel statistics

In order to monitor the load-balancing feature on the VPN 3000 Concentrator side, select Monitoring > Statistics > Load Balancing, and make sure that all the participating VPN 3000 Concentrators are listed as peers. If you enable Encryption under the Load Balancing configuration window, you see the VCA/IPsec tunnels with your peer when you select Monitoring > Sessions.

99
Views
0
Helpful
1
Replies
CreatePlease to create content