I understand that the 3030 can auto-update the 3002. But is it possible schedule the update and the reboot of the 3002? I currently have about 100 devices and manually updating and rebooting is going to be a nightmare, any suggestions? TIA
When you enable client update, upon tunnel connection or IKE rekey,the central-site VPN Concentrator sends an IKE packet that contains an encrypted message that notifies VPN 3002 hardware clients about acceptable versions of executable system software and their locations. If the VPN 3002 is not running an acceptable version, its software is automatically updated via TFTP.
The client update facility sends notify messages to VPN 3002s in batches of 10 at 5-minutes intervals.
Updates are supported per group. This means that all members of a group can obtain the same updates from the same server at approximately the same time.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...