VPN 3002 Network Extension with DHCP on the public interface
Is it possible to have a remote VPN 3002 with a DHCP IP address on the public interface and enable lan-to-lan (network extension with split tunnel) with a VPN 3030 (the 3030 has a static IP address on the public interface) at the central site.
Re: VPN 3002 Network Extension with DHCP on the public interface
I dont think it supports DHCP for its interface configuration. I looked through the configuration guide and found nothing. You can use DHCP to assign ip addresses to the tunnel clients but not to the tunnel itself.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...