I have a VPN 3002 configured for network extension mode connecting to an ASA. The connection works fine. But we have an application that use tracert to verify the client is accessable (SMS remote control) before you can connect. The problem is that when i tracert to a client that is behind the 3002 device
I get a request timed out * hop. Then it completes on the 3rd.
Is this normal behavior for a VPN 3002? I have other remote users using the Cisco VPN client and the traces work fine.
How can get it to trace with no requests timed out?
Traceroute requires Sun Microsystems Javaâ¢ Runtime Environment (JRE) 1.4.1 or later. If you do not have JRE installed, do not attempt to run this feature. Running Traceroute without JRE causes the VPN Concentrator Manager to fail.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...