Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

VPN 3005 acting as gateway to Internet

Hi!

I have configured the Cisco 3005 to accept remote connections through an ADSL access.

The problem is that the client wants that some host in the Concentrator´s local lan access to Internet through the same ADSL link using the concentrator as gateway. I configured a filter in the public interface that allowed the default traffic for that public interface plus the rules Incoming HTTP in and outgoing HTTP out. The problem is that i can´t web browse with this configuration in the public interface. Could anyone give me some idea of the rule I should add or the filter to configure?

Thanks in advance,

Best Regards,

Nuria

2 REPLIES
Bronze

Re: VPN 3005 acting as gateway to Internet

Hi,

Enable NAT globally on the Box, and cnfigure NAT by going to the following link:

Configuration | Policy Management | Traffic Management | NAT | Interface Rules

Choose public (default) filter where this Interface NAT rule applies.

Thanks,

Afaq

New Member

Re: VPN 3005 acting as gateway to Internet

Hi!

I configured a NAT rule in the public interface and enabled NAT. The problem is that when default public filter is applied to the public ethernet I can´t browse but when I change to a filter that allows any I can browse. I wanted to know which rules do I have to add to the default public filter to browse.

Thanks a lot,

Nuria

86
Views
0
Helpful
2
Replies
CreatePlease to create content