Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VPN 3005 keeps rebooting

Hello,

We have purchased a used 3005 concentrator and have just hooked it up to our network. The unit keeps rebooting within 1-3 minutes of me doing anything in the admin console. In the logs the only thing I see is this

1 02/12/2008 16:48:03.090 SEV=1 EVENT/37 RPT=1

Reset Reason : 2 (Hardware-Reset)

2 02/12/2008 16:48:01.110 SEV=4 CONFIG/15 RPT=1

READ header End not found.

3 02/12/2008 16:48:02.830 SEV=4 HTTP/28 RPT=1

HTTP server starting.

4 02/12/2008 16:48:03.510 SEV=3 IP/1 RPT=1

IP Interface 1 status changed to Link Up.

5 02/12/2008 16:48:03.530 SEV=3 IP/1 RPT=2

IP Interface 2 status changed to Link Up.

6 02/12/2008 16:48:03.710 SEV=3 IP/2 RPT=1

IP Interface 1 status changed to Link Down.

7 02/12/2008 16:48:04.710 SEV=3 IP/2 RPT=2

IP Interface 2 status changed to Link Down.

8 02/12/2008 16:48:05.710 SEV=3 IP/1 RPT=3

IP Interface 1 status changed to Link Up.

9 02/12/2008 16:48:05.710 SEV=3 IP/1 RPT=4

IP Interface 2 status changed to Link Up.

Does anyone know what may be causing this? I'm running 4.7.2.N-k9 of the firmware.

Thanks,

Nick

  • Other Security Subjects
2 REPLIES
Silver

Re: VPN 3005 keeps rebooting

You will need to check the crash dump on the concentrator. Most possible cause of hardware reset is memory fault. Following link may help you

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_field_notice09186a008010565e.shtml

New Member

Re: VPN 3005 keeps rebooting

Hi Thanks for the help. The unit has 128megs of memory and I didn't get any error message like what is provided in the link.

119
Views
0
Helpful
2
Replies
This widget could not be displayed.