I'm using the VPN 5000 client 5.1.1 3DES version to connect to my company's network.
This works if NAT transparacy mode is OFF.
I recently bought a home router to be able to share my internet connection between multiple PC's.
Now the VPN client must use the NAT transparancy mode, but I cannot establish a VPN connection. The ISP seems to use NAT on his network as well and the VPN client does not seem to be able to handle 2 X NAT.
Does anyone (CISCO) know if there is a fix for this problem?
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...