Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VPN Access behind one PIX to another PIX

I have two PIX 520's confiugred in the same building but in different offices. Both PIX devices are on the same external, public IP network.

I want to establish a PPTP VPN connection from behind 1 PIX to the other and was wondering if this is possible?

Thank you.

1 REPLY

Re: VPN Access behind one PIX to another PIX

Chris, it should be possible, you could also consider L2L VPN as it seems to fit better your requirements, bellow are couple of examples for L2l vpn as well.

Configuring PIX to use PPTP based on Code 6.x

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080143a5d.shtml#intro

L2L VPN between two PIXes based on Code 6.x

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008055bd85.shtml

Simple Pix-to-PIX Ipsec VPN tunnel based on Code 6.x

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a0080094761.shtml

IPsec Tunnel betweem two PIXes based on code 7.x

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00805a87f7.shtml

Rgds

Jorge

105
Views
0
Helpful
1
Replies