VPN access to the network. Its connected, what next?
I have a pretty simple question. I was able to configure vpn access for my client site. So now we are able to connect from the boss's home to the firewall. We are using a PIX 506 firewall. The client is win2k using vpn3000 client software.
My problem is that i dont know how to configure the client so that she can see the company network resoueces from her home. When I go into network resources, we dont see our company's netwrok listed, hence she cant access files and other apps on the network. Thank you.
Re: VPN access to the network. Its connected, what next?
Make sure on the w2k Internet connection you have "Client for MS Networks" and "File and Print Sharing" turned on. After that, if her computer is not part of the w2k Domain she will need to go start, run, and type \\ipaddress or \\computername to get to the shares on that machine
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
Table of Contents Introduction:This document describes details on how
NAT-T works. Background: ESP encrypts all critical information,
encapsulating the entire inner TCP/UDP datagram within an ESP header.
ESP is an IP protocol in the same sense that TCP an...