11-04-2007 10:01 PM - edited 02-21-2020 03:21 PM
Hi,
I would like to know what are the ports and protocol that i need to allow from the cisco PIX to reach our VPN 3000 concentrator for my remote users ip
Regards,
Vinoth
Solved! Go to Solution.
11-05-2007 10:35 AM
Hi,
ISAKMP - UDP 500
ESP - Protocol 50
IPSEC Over UDP - UDP 4500
IPSEC Over TCP - TCP 10000 (Default)
SSL VPN - TCP Port 443
I hope it helps.
Regards,
Arul
Please rate helpful posts
11-05-2007 10:35 AM
Hi,
ISAKMP - UDP 500
ESP - Protocol 50
IPSEC Over UDP - UDP 4500
IPSEC Over TCP - TCP 10000 (Default)
SSL VPN - TCP Port 443
I hope it helps.
Regards,
Arul
Please rate helpful posts
11-05-2007 09:52 PM
Allow below ports for vpn....
ISAKMP - UDP 500
ESP - Protocol 50
AH - Protocol 51
IPSEC Over UDP - UDP 4500
IPSEC Over TCP - TCP 10000 (Default)
SSL VPN - TCP Port 443
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: