Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

VPN and IP cameras

I have an ASA that we are using sucessfully for all our needs, but there is one thing I can't seem to get to work no matter how hard i try.

We have several IP survellance cameras on our private network that I can call up through a VPN tunnel, but I can't see the video. I have tried accessing an AXIM video server, a Panasonic IP camera, it the same story. I get the webpage, but not the embedded mpeg video stream itself.

We have even tried Nating an IP camera with the same result.

Inside the network, the cameras work fine from interface to interface (lower to higher security, or higher to lower security).

What am I missing? All ports are open in the tunnel, and everything works (alot of stuff that didn't work well with my PIX 515 work perfect with the ASA).

Am I the only one doing this?

Any suggestions would be greatly appreciated.

3 REPLIES
Community Member

Re: VPN and IP cameras

Hi Crooks

Check these two links. I think it describes your problem. You should adjust the MSS (maximum size segment) to go inside the IPSEC tunnel.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a00804c8b9f.shtml

http://www.cisco.com/en/US/tech/tk827/tk369/technologies_tech_note09186a0080093f1f.shtml

Regards

amady

Community Member

Re: VPN and IP cameras

Community Member

Re: VPN and IP cameras

did you ever get this to work?

832
Views
0
Helpful
3
Replies
CreatePlease to create content