I have a Pix 506 and I want to get VPN services for our remote sales people. They are connecting from hotel ISPs and what not...needless to say they wont have the same IP address when connecting to the VPN. What I want to do is use an XServe(OS X 10.4.10)acting as a VPN server so there are more detailed logs.
My question is...How do i configure my Pix 506 to passthrough to the Xserve VPN Server.
I have seen many docs on the Pix506 acting as a VPN server but thats not what our office wants. Thanks in advance.
Click Next to configure the Internet Key Exchange (IKE) policies and use the Add button to create the new policy.
Configurations on both sides of the tunnel must match exactly. However, the Cisco VPN Client automatically selects the proper configuration for itself. Therefore, no IKE configuration is necessary on the client PC.
Table of ContentsIntroductionVersion HistoryPossible Future
UpdatesDocuments PurposeNAT Operation in ASA 8.3+ SectionsRule Types
Network Object NATTwice NAT / Manual NATRule Types used per SectionNAT
Types used with Twice NAT / Manual NAT and Network Obje...
[toc:faq]Introduction:This document describes details on how NAT-T
works.Background:ESP encrypts all critical information, encapsulating
the entire inner TCP/UDP datagram within an ESP header. ESP is an IP
protocol in the same sense that TCP and UDP are I...