05-29-2002 10:34 AM - edited 02-21-2020 11:46 AM
Hi,
Can a VPN Session between a Cisco VPN Client and a IOS router work when the recieving interface of the router is a tunnel interface (gre)..
Erik
06-06-2002 05:52 AM
VPN client is IPSEC. You can use Microsofts PPTP (over GRE) to tunnel directly to the router.
06-06-2002 06:06 AM
Maybe I didn't explain my question good enough:
We have a router with three interfaces, one is our local LAN (private ip), one is our DMZ (public ip) and one is virtual interface "tunnel 0" (with a public ip) which we get our internet traffic through.
Will I be able to configure the router to be able to use the Cisco VPN Client to connect to our office? In other words can a VPN configuration be applied to a tunnel interface?
06-06-2002 10:12 AM
It appears your post is either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center http://www.cisco.com/tac or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen
If anyone else in the forum has some advice, please reply to this thread.
Thank you for posting.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: