Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

VPN between Xpprosp2 and sbs2000server both behind a nat devise

hello,

I'm trying to establish a Vpn connection from home to work.

Here Are some details about the set-up.

At home :

Windows xp pro sp2. Connecting the internet through a standard adsl modem (speedtouch510).

This modem has a static public address assigned by the provider

At work :

The cisco836 acting as a perimeter router directly conected to the Internet via isdn adsl with a static public address on dialer1

Behind the router our network consisting of a sbs2000 domain server and about 10 cliënts xp pro sp2 computers.

I like to use this router acting as the pass trough (transportmode) between home and the office.

Can someone help me with a configuration for the router.

Best regards Ilja zwolsman

2 REPLIES
Gold

Re: VPN between Xpprosp2 and sbs2000server both behind a nat dev

I think it should be best for you connect via VPN client (installed on you home PC) to 836 (it will be easy VPN server)

try following document

http://www.cisco.com/application/pdf/en/us/guest/products/ps6659/c1650/cdccont_0900aecd80313bdf.pdf

Tahn you will have access to all network computers

Another option is create pernament IPsec tunnel between speedtouch510 and 836

M.

Hope that helps , rate if it does

New Member

Re: VPN between Xpprosp2 and sbs2000server both behind a nat dev

Hello,

Thanks for the reply.

The configuration in the document You advised consists of a different router (not the 836 router).

Although the 836 router is an IOS router I'm wondering if it can act as an Easy VPN Server.In that case Your advise is very welcome !!

best regards, Ilja Zwolsman

100
Views
0
Helpful
2
Replies