Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN Client 3.5 to PIX to inside networks

I have the PIX and inside router configured to allow a VPN client connect to the inside network but the VPN Client cannot go beyond the inside network (over a frame-relay route to another network) Is this the nature of the VPN Client or is there a PIX or routing config to solve this?

1 REPLY
New Member

Re: VPN Client 3.5 to PIX to inside networks

No, you should be able to get to any subnet on your LAN/WAN. Make sure you have a route via the inside interface of the PIX to the network that you are trying to reach on the Frame relay network using your inside router as the gateway.

Example:

10.1.1.0/24 Inside Lan

10.1.2.0/24 Network on Frame relay

Pix inside interface 10.1.1.1

e0 interface of router 10.1.1.2

Add to Pix

route inside 10.1.2.0 255.255.255.0 10.1.1.2

HTH

RJ

92
Views
0
Helpful
1
Replies
CreatePlease to create content