Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN Client 3.x + LOCAL LAN ACCESS

Hi,

i have a big problem with the VPN Client an the Local LAN Access. I have a Pix 501 (6.22 +PDM 2.1) on the central side. The VPN Clients are some Computers from a other Company with their own Network. The VPN Connection over a DSL WAN connection works great, but the Clients don´t have access to their own LAN. (some Fileserver...) If i allow the Local LAN access on the Cisco VPN Client, it doesn´t matter. I read something about Tunnel-Splitting, but .... i try.... i try....

Thanks for any response... Sebastian

3 REPLIES
New Member

Re: VPN Client 3.x + LOCAL LAN ACCESS

The only thing you can do is allow split tunneling on the pix because the local lan access feature is not supported on the pix just yet.

New Member

Re: VPN Client 3.x + LOCAL LAN ACCESS

Hi,

thanks for your reply. But i just tried that.

I have two networks: The Client Network is 192.168.1.0/24 and the Central Side is 192.168.2.0/24

Do you have a running configuration with tunnel-splitting ?

Regards, Sebastian

Cisco Employee

Re: VPN Client 3.x + LOCAL LAN ACCESS

You have to do something like:

access-list 101 permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0

vpngroup group_name split-tunnel 101

http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_62/cmdref/tz.htm#xtocid12

Regards,

129
Views
0
Helpful
3
Replies
CreatePlease to create content