We are having some problem with the Cisco VPN client 5.0.03 on a windows XP workstation, When try to connect with the client, getting an error message " ERROR: CISCO VPN CONNECTION TERMINATED LOCALY BY CLIENT, REASON 440 DRIVER FAILURE" What is the reason for this? Really appreciate some help.
Reason 440: Cannot start the driver. Make sure DNE is installed correctly. Make sure that _cvpndrva_ is installed correctly.
Description or Action:
Ensure that the DNE driver is loaded. Go to command prompt and type _net stop dne_. It should not be able to be stopped. However, if it cannot be found, then it is not installed. If installed, try _net stop cvpndrva_ and _net start cvpndrva_. This can't be done via service manager.
Note: Do not type the _ character when you enter these commands.
If above does not fix the issue, try un-installing and re-install the vpn client again, see if that resolve the problem, post results.
Login to the FXOS chassis manager.
Direct your browser to https://hostname/, and log-in using the user-name and password.
Go to Help > About and check the current version:
Check the current version availa...
We have configured the outside and inside Interface with official ipv6 adresses, set a default route on outside Interface to our router, we also have definied a rule , which also gets hits, to permit tcp from inside Interface to any6.
In Syslog I also se...