cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2935
Views
0
Helpful
3
Replies

VPN client disconnect after 2 hour

Taraslviv
Level 1
Level 1

workstation running XP SP2 and has installed the vpn client 4.8.00.0440 and cisco 1721. vpn client connected and after 2 hour it disconnect

log detail

1203 14:25:04.125 06/07/06 Sev=Info/4 IKE/0x63000017

Marking IKE SA for deletion (I_Cookie=0EBB7101F2891E6A R_Cookie=F6E2CF4A2C238EAE) reason = DEL_REASON_PEER_NOT_RESPONDING

1204 14:25:04.125 06/07/06 Sev=Info/4 IKE/0x63000013

SENDING >>> ISAKMP OAK INFO *(HASH, DWR) to 192.168.*.*

1205 14:25:04.640 06/07/06 Sev=Info/4 IKE/0x6300004B

Discarding IKE SA negotiation (I_Cookie=0EBB7101F2891E6A R_Cookie=F6E2CF4A2C238EAE) reason = DEL_REASON_PEER_NOT_RESPONDING

1206 14:25:04.640 06/07/06 Sev=Info/4 CM/0x63100013

Phase 1 SA deleted cause by DEL_REASON_PEER_NOT_RESPONDING. 0 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system

1207 14:25:04.640 06/07/06 Sev=Info/5 CM/0x63100025

Initializing CVPNDrv

1208 14:25:04.640 06/07/06 Sev=Info/6 CM/0x63100031

Tunnel to headend device 192.168.117.165 disconnected: duration: 0 days 2:0:31

1209 14:25:04.671 06/07/06 Sev=Info/4 IKE/0x63000001

IKE received signal to terminate VPN connection

i don't like push "connect" every two hour :)

what should i do?

1 Accepted Solution

Accepted Solutions

sean
Level 3
Level 3

What are the session timeout values on the terminating device?

View solution in original post

3 Replies 3

sean
Level 3
Level 3

What are the session timeout values on the terminating device?

how can I see this?

Should be listed in the running config.