Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

VPN client disconnect after 2 hour

workstation running XP SP2 and has installed the vpn client 4.8.00.0440 and cisco 1721. vpn client connected and after 2 hour it disconnect

log detail

1203 14:25:04.125 06/07/06 Sev=Info/4 IKE/0x63000017

Marking IKE SA for deletion (I_Cookie=0EBB7101F2891E6A R_Cookie=F6E2CF4A2C238EAE) reason = DEL_REASON_PEER_NOT_RESPONDING

1204 14:25:04.125 06/07/06 Sev=Info/4 IKE/0x63000013

SENDING >>> ISAKMP OAK INFO *(HASH, DWR) to 192.168.*.*

1205 14:25:04.640 06/07/06 Sev=Info/4 IKE/0x6300004B

Discarding IKE SA negotiation (I_Cookie=0EBB7101F2891E6A R_Cookie=F6E2CF4A2C238EAE) reason = DEL_REASON_PEER_NOT_RESPONDING

1206 14:25:04.640 06/07/06 Sev=Info/4 CM/0x63100013

Phase 1 SA deleted cause by DEL_REASON_PEER_NOT_RESPONDING. 0 Crypto Active IKE SA, 0 User Authenticated IKE SA in the system

1207 14:25:04.640 06/07/06 Sev=Info/5 CM/0x63100025

Initializing CVPNDrv

1208 14:25:04.640 06/07/06 Sev=Info/6 CM/0x63100031

Tunnel to headend device 192.168.117.165 disconnected: duration: 0 days 2:0:31

1209 14:25:04.671 06/07/06 Sev=Info/4 IKE/0x63000001

IKE received signal to terminate VPN connection

i don't like push "connect" every two hour :)

what should i do?

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: VPN client disconnect after 2 hour

What are the session timeout values on the terminating device?

3 REPLIES
Bronze

Re: VPN client disconnect after 2 hour

What are the session timeout values on the terminating device?

New Member

Re: VPN client disconnect after 2 hour

how can I see this?

Bronze

Re: VPN client disconnect after 2 hour

Should be listed in the running config.

186
Views
0
Helpful
3
Replies
CreatePlease login to create content